Defiant Motor Culture

Window tinting

Window tinting,
in and out the same day.

Professional window tinting that cuts heat and glare, blocks UV, adds privacy and finishes the car properly. Quality tint films, installed clean, made to last.

Ford Ranger Platinum with tinted windows, close side view
  • 3M
  • Avery Dennison
  • Hexis

Tint is the smallest job on this list and the one people notice every day. A Melbourne summer through untinted glass is heat on your arm and glare off the bonnet in front of you, and the UV that comes with it is what fades a dashboard and cracks a steering wheel.

The film does three things at once. It drops the heat coming through the glass, it takes the glare down without making the car dark to drive, and it stops the UV that ages everything inside. The privacy is the part people ask for and the part that matters least.

Turnaround
A few hours
Where
9 Tech Way, Cranbourne VIC 3977
Film brands
3M, Avery Dennison, Hexis
Holden Commodore ute in green with tinted windows, full side profile

What you can have

Front, rear and sides.

  • Full car

    Every window behind the windscreen, matched front to back so the car reads as one shade rather than two.

  • Rears only

    The back half of the car, which is where most of the heat and all of the privacy is. The common choice on a family car.

  • Darkness to suit

    A range of shades, and we will tell you where the legal line sits before anything goes on the glass.

  • Old film removed

    Purple, bubbled or peeling tint stripped off and the glass cleaned back before the new film goes on.

The work

Window tinting out of
the Cranbourne workshop.

Nissan Navara with tinted front windows, close three-quarter
Green Commodore ute with tinted windows, front three-quarter
Ford Ranger Platinum side on, tint matched front to back
Nissan Navara dual cab with tinted windows, side on
Rear three-quarter of the green Commodore ute showing the tint carried across the back glass

How it goes

Why it takes a few hours and not twenty minutes.

  1. 01

    Glass comes clean first

    Every window is stripped of anything on it and cleaned both sides. Anything left behind sits under the film permanently.

  2. 02

    Film cut to the glass

    Each piece is cut and shaped to the window it is going on, not to a rough size.

  3. 03

    Heat-shrunk to the curve

    Rear glass is curved in two directions. The film is shrunk to that curve before it goes in, which is the step that decides whether you get creases.

  4. 04

    Fitted and left to cure

    Installed wet and squeegeed out. A little haze for a few days is the moisture leaving and it clears on its own.

Questions we get asked.

How dark can I legally go in Victoria?

The front side windows have to let at least 35% of the light through. Behind the driver you can go to 20%, provided the car has a mirror on both sides - which almost everything does. The windscreen stays clear apart from a band across the top. We will talk you through where your car sits before anything is cut, because it is your car that gets defected, not ours.

How long before I can wind the windows down?

Two to three days. The film needs to bond to the glass and winding down early is the one thing that peels a fresh edge.

Why does it look hazy?

That is moisture still leaving from under the film. It clears itself within a few days and it is normal on every fresh tint.

Can you take old tint off?

Yes. Old film that has gone purple or started bubbling comes off and the glass gets cleaned back properly before new film goes on.

Book the car in.

Tell us the make, model and what you are after. We will come back with a price and a rough date.